ROBOTICA & MANAGEMENT - Vol. 24, No. 2, December 2019, pp. 4-7

Influence of Rectilinear Infill Parameters on Mechanical Behavior of 3D Printed Parts - A FEM Approach


Vasile Cojocaru

“Eftimie Murgu” University of Resita
Traian Vuia Square, No. 1-4, Resita, Romania
E-mail: v.cojocaru@uem.ro

Abstract:
In order to reduce manufacturing time and material consumption, a 3D printed component can be made with a solid shell and an infill matrix for the internal volume. This infill matrix can have different geometries and different degrees of filling. The paper follows the analysis, by finite elements method, of the stresses and deformations that appear in a sample with rectilinear infill. The influence of infill parameters on the mechanical properties of the parts is studied using 18 distinct geometries. The variation of maximum equivalent von Mises stresses correlated with total material consummation (volume) show that, at similar material consumption, the part with a high number of cells has a higher strength.

Keywords:
3D-printing, infill, FEM, mechanical properties.

Full Text

References

[1] Abdullah A.M., Mohamad D., Rahim T., Akil H.M., Rajion Z.A.: “Effect of narrow infill density gap on the compressive properties of 3D printed carbon fibre reinforced acrylonitrile butadiene styrene”, Journal of Mechanical Science and Technology, Vol. 33, No. 5, p. 2339-2343, 2019.

[2] Bartolai J., Wilson-Heid A., Kruse J., Beese A., Simpson T.: “Full Field Strain Measurement of Material Extrusion Additive Manufacturing Parts with Solid and Sparse Infill Geometries”, JOM, Vol. 71, No. 3, p. 871-879, 2019.

[3] Clausen A., Andreassen E., Sigmund O.: “Topology optimization of 3D shell structures with porous infill”, Acta Mechanica Sinica, Vol. 33 (4), p. 778-791, 2017.

[4] Fu J., Li H., Xiao M., Gao L., Chu S.: “Topology optimization of shell-infill structures using a distance regularized parametric level-set method”, Structural and Multidisciplinary Optimization, Vol. 59, p. 249-262, 2019.

[5] Gopsill J., Shindler J., Hicks B.: “Using finite element analysis to influence the infill design of fused deposition modelled parts”, Progress in Additive Manufacturing, Vol. 3, p. 145-163, 2018.

[6] Groen J., Wu J., Sigmund O.: “Homogenization-based stiffness optimization and projection of 2D coated structures with orthotropic infill”, Computer Methods in Applied Mechanics and Engineering, Vol. 349, p. 722-742, 2019.

[7] Kain S., Ecker J.V., Haider A, Musso M., Petutschnigg A.: “Effects of the infill pattern on mechanical properties of fused layer modeling (FLM) 3D printed wood/polylactic acid (PLA) composites”, European Journal of Wood and Wood Products, article online first, 2019.

[8] Lee T., Lee J., Lee K.: “Extended block based infill generation”, The International Journal of Advanced Manufacturing Technology, Vol. 93, p. 1415-1430, 2017.

[9] Lubombo C., Huneault M.: “Effect of infill patterns on the mechanical performance of lightweight 3D printed cellular PLA parts”, Materials Today Communications, Vol. 17, p. 214-228, 2018.

[10] Nedelcu D., Cojocaru V., Micu L.M., Florea D., Hluscu M.: “Using of Polymers for Rapid Prototyping of an Axial Microturbine Runner and Wicked Gates”, Materiale Plastice, Vol. 56, no. 2, p. 454-459, 2019.

[11] Samykano M., Selvamani S. K., Kadirgama K., Ngui W. K., Kanagaraj G., Sudhakar K.: “Mechanical property of FDM printed ABS: influence of printing parameters”, The International Journal of Advanced Manufacturing Technology, Vol. 102, p. 2779-2796, 2019.

[12] Tanveer Q., Haleem A., Suhaib M.: “Effect of variable infill density on mechanical behaviour of 3‑D printed PLA specimen: an experimental investigation”, SN Applied Sciences, online first, 2019.

[13] Tassi G.M., Gao Q., Diaz R.: “Infill Analysis and Optimization in Additive Manufacturing Applications”, EngOpt 2018 Proceedings of the 6th International Conference on Engineering Optimization, p. 593-604, 2019.

[14] Wadbro E., Niu B.: “Multiscale design for additive manufactured structures with solid coating and periodic infill pattern”, Computer Methods in Applied Mechanics and Engineering, Vol. 357, 112605, 2019.

[15] Wu J., Clausen A., Sigmund O.: “Minimum compliance topology optimization of shell–infill composites for additive manufacturing”, Computer Methods in Applied Mechanics and Engineering, Vol. 326, p. 358-375, 2017.